ARYZE LYVE

ARYZE LYVE: Better building through a holistic design approach.

ARYZE LYVE;  a holistic design and construction approach to cost-effectively building a premium durable, energy-efficient and healthy home.  Based on building science principles, the National Research Council of Canada prescribed the optimal building technique in the 1960s, coined the PERSIST or Pressure Equalized Rain Screen Insulated Structure Technique. The technique is tried and true: it is how modern commercial buildings are designed.  ARYZE has developed a cost-optimized method for applying this technique to residential construction in Victoria. In addition to a premium home, ARYZE LYVE offers renewable energy integration and designs considerate of all aspects of health and comfort.

Imagine entering your house and closing your door on street noise and air pollution.  Your home is peaceful and smells clean and fresh. Imagine a simpler lyfestyle free of concern, maintenance hassles, and rising energy bills.

What does a better home look like?

ARYZE understands the need for better building. A home is often a family's single greatest investment and where we spend most of our time; homeowners deserve comfort, peace, and dependability. As the demands on our planet increase, it is our responsibility to build more efficiently.  At ARYZE we share an earnest concern for increasing weather severity, rising energy costs, diminishing outdoor air quality, and asset resiliency.

Buildings use about 40% of global energy, 25% of global water, 40% of global resources, and emit approximately 1/3 of GHG emissions. Houses built to code-minimum standards are part of the problem; they cost a lot to operate and are plagued by rot, mould, and mildew.  Imagine being part of the solution and living a healthier lifestyle with ARYZE.  

ARYZE LYVE is the way all homes should be built.

Code-minimum building methods dominate the industry.  If followed as a benchmark, it means a new home is being built to lowest standard allowable by law.  Houses constructed this way can be hard to heat and prone to rot, mould and mildew.  Operating and repairing these buildings over decades is costly, both for the homeowner and for the environment.  We also anticipate future changes to building codes which will implement new building technology and energy-efficiency requirements.  

Holistic and intelligent design delivers a premium house of any style offering:

  • A 75-90% reduction in energy costs. 

  • No risk of rot and mould, ever. 

  • Improved indoor air quality.

  • A quiet and peaceful indoor environment. 

  • A secure investment

ARYZE LYVE is a cost-effective application of optimal building science. For only a 3-6% cost increase over code-minimum construction, ARYZE can deliver peace of mind: a secure investment, a healthy living environment and a dependable house. So what does it take to achieve this new standard in comfort and quality? And how is it achieved for only a marginal increase over inferior conventional methods?

LYVE Building Technique

Achieving exceptional durability, comfort, and performance requires a holistic design approach.  At the heart of the strategy is a proven wall system based on building science fundamentals. Cost-effectiveness is achieved by relying on conventional tools and materials. When put all together, a 2200 sq ft home for example, can be heated with a hair dryer. The result is an impeccably comfortable home.

ARYZE LYVE: high performance building

ARYZE LYVE Components:

1. Continuous Outsulation: this is like wrapping your house in a really thick sweater. Insulation surrounds the entire building envelope to reduce heat loss in the winter, reduce heat gain in the summer, reduce noise infiltration, and make a more comfortable interior by mitigating thermal gradients in the room. Even the foundation, typically responsible for 30-50% of heat loss, is insulated from the ground. Most significantly, by placing insulation outside the building, the chance of developing mould and mildew in the wall is eliminated. And because the insulation is continuous, you get the nominal R-value of your insulation instead of the effective R-value. (For conventional construction methods, nominal R-22 becomes effective R-16.1 or less).

2. Advanced framing: by installing insulation where it belongs – on the outside of the structure – advanced framing techniques are possible and less lumber is required. Code-minimum buildings require 2x6 studs only because of insulation requirements. With insulation outside, the structure can be executed with advanced framing techniques: 2x4 studs at 24” o.c. spacing, single top plates, two-stud corners, no jack studs, and no cripples. Advanced framing is faster, cheaper, more energy efficient and uses at least 30% less lumber.

3. One Superior Barrier: air tightness is key to high-performing buildings. This idea has been part of conventional building for some time but implemented in a way such that it does a disservice to the health of the building. After a plastic vapour barrier is stapled to the inside of a stud wall, it gets littered with holes, resulting in drafts, moisture transfer, and eventually mould. Since the ARYZE LYVE places insulation outside the building, the air and vapour barrier can also be combined and applied to the outside of the building and at a more appropriate dewpoint. Thus everything inside the building is warm and dry; there is less expansion/contraction, less shifting, and less cracking. There are no drafts, less heat loss, reduced humidity in the summer, no risk of mould or rot, and improved durability.

4. No thermal bridges: A thermal bridge is part of a structure which transmits heat through the building envelope; basically, anything that isn’t insulation is a thermal bridge. In conventional stud-frame construction, approximately 25% of the framing is structurally unnecessary and each stud being a thermal bridge, about 1/3 of the wall system is uninsulated and a thermal bridge. The ARYZE LYVE design eliminates thermal bridges. This dramatically reduces heat loss and raises the interior wall temperature, making a room more comfortable.

5. High-performance windows: triple-glazed high-performance windows are optimized for size and location so that they add more energy to the home than they lose. Triple-glazing improves the interior surface temperature of the windows which enhances comfort by reducing thermal gradients and cold convection currents in the room.

6. Ventilation with heat recovery: a well-sealed building envelope requires optimized air transfer. Heat Recovery Ventilators (HRVs) provide clean, filtered fresh air year round and eliminate stale, odorous, and humid air from inside. While providing fresh air, HRVs also recover at least 75% of the heat from air being eliminated. In conventional ventilation schemes, this heat is either dumped into the atmosphere or stale air is recirculated within the house.

Leveraging High-Performance Building Technology

For new construction, ARYZE LYVE is a cost-effective strategy for high-performing building. ARYZE LYVE design principles are suitable to any architectural style and client requirements. For anyone focused on a real estate investment, whether residential re-sale, residential or commercial rental, or retail leasing, studies have shown that green buildings earn 5-25% more in resale and also have higher occupancy rates.  Given the direction of political policy and the building code toward better performing buildings, an ARYZE LYVE is a sure way to protect an investment in future markets of green buildings.

For renovations, the ARYZE LYVE design principles can be applied to make drastic gains in performance and comfort. Windows can be optimized and retrofitted with triple-glazed units.  Advanced wall systems can be created using existing structure. Air tightness is easily improved and HRV units are easily retrofitted. The ARYZE LYVE advanced wall system will protect the life of any building for generations.

 

 

© ARYZE Development and Construction. 1839 Fairfield Road. Victoria, BC V8S 1G9. General Inquiries: (778) 977-1977